There are many ways to find leaks on a commercial flat roof, but the easiest is to look for water. Leaks usually occur in the seams or holes of a flat roof. Water can also enter through an edge or absorb into the insulation, making tracking back to the source difficult. In these cases, you need to look for bubbles, soft spots, or separations in the seams. You should also check the membrane for other problems.
Using a garden hose, you can locate a leak by walking up and down the roof. Look for low spots, they are often the result of water seeping in – and if you spot any, you’ve got a leak. A leak can also be identified by a pooling of water. Try walking slowly and steadily while dripping water into the roof. This may take several hours, but it will give you a good idea of where to look.
You’ll also need to check the structure of the roof to make sure there are no water pipes or appliances in it. You should look for water stains, mold, and wet insulation. In some cases, the leak can also come from an air conditioning condensate drain line or a hot water heating pipe. Fortunately, there are several ways to find leaks on a flat roof. This article will walk you through some of the most common ways.
One of the easiest ways to find leaks is to look for concrete cracks. Water will often collect in the cracks, causing ponding and sagging. Alternatively, you can look for a spot with a gentle slope to drain the roof. The same holds true for small low spots on a commercial flat roof. In many cases, small cracks will eventually lead to a big problem.
In either case, it’s important to determine the cause of the leak. It’s never good to have pooling water on your roof, so you should check for other signs of leakage and repair it as soon as possible. A stubborn leak can lead to expensive water damage restoration or even a total commercial roof replacement. If you suspect a leak, call a Denver commercial roofer immediately. If the problem isn’t resolved in a timely fashion, you might end up with a ruined building, that’s why its always better consulting a commercial roofing specialist.
When inspecting a commercial flat roof, you may notice several common symptoms. The most obvious of these are water spots on the ceiling. They also mean a leak is present. Interior wall bubbling is another sign of leakage and often accompanies ceiling water spots. However, this sign may take several years to show up. The good news is that it’s fairly easy to repair a commercial flat roof when you know what to look for.
The infrared thermography can be used to locate water in the roof. It can also be used to detect wet insulation, such as closed cell spray foam. Infrared thermography can also detect mechanical equipment, such as heaters, under the roof deck, and thin gravel surfacing. This method is best suited for a single leak, but multiple breaches may exist. This is why the best commercial roofer in Denver is essential to ensuring the safety of the building and its inhabitants.
If you are concerned about the safety of your home during this process, you should consult the best commercial roofer Denver before completing the project.